Today I Learned...

Mindy · 01-24-2020, 09:41 AM

https://www.youtube.com/watch?v=fD4OMlP7j1U

Learned how to make arcs and circles

(G02, G03)(its needed for the air motor I am in the process of starting and plan to build. Gotta cut 5 parts and place on top of last courses base plate

Wednesday I left early without finishing what i started but im going to take extra time going further. professor allows us to come in at 4p, 2 hours early.

still completely understanding it, one way I have learned to understand things is by explaining as much as i can about the subject to my pops. he is the best listener i have ever met.

Plankton · 01-24-2020, 09:53 AM

Quote:

Originally Posted by Mindfulness

...explaining as much as i can about the subject to my pops. he is the best listener i have ever met.

This is everything.

Mindy · 01-24-2020, 09:56 AM

Quote:

Originally Posted by Plankton

This is everything.

Raime · 01-28-2020, 08:14 PM

https://www.reuters.com/article/us-w...19603620080423

I didn't know wizards cared about making penises disappear. ****'s tight tho.

Mindy · 02-05-2020, 09:41 AM

I have a part similar to this where I have to drill 6 holes, this guy explains a way to do that.

looking at my blueprints for all the parts, its going to be the most detailed project i've ever built. its an air motor, ive seen a finish version and its cool asf. but all the parts need to be machined to fit tight and .005 off on a part, they wont fit like legos

Plankton · 02-05-2020, 09:59 AM

GD&T it up.

Mindy · 02-05-2020, 10:16 AM

Quote:

Originally Posted by Plankton

GD&T it up.

I plan to finish this CNC 2 course, I'll definitely share a photo of the parts or the motor when done. CNC 1 was basically just basics and getting a block to certain size and then program your name into it. that part from CNC 1, is the base plate to this air motor

Plankton · 02-05-2020, 11:12 AM

I was trial by fire when I got thrown into running a turret lathe while in between jobs. They showed me a simple part and how to make it, then left me alone with little guidance. I was pumping out graduated steel rolls for pipe bending in a matter of a week or two. I had quite a bit of programming experience though, so that helped.

Good luck on your 2nd installment!

Mindy · 02-05-2020, 11:27 AM

Quote:

Originally Posted by Plankton

I was trial by fire when I got thrown into running a turret lathe while in between jobs. They showed me a simple part and how to make it, then left me alone with little guidance. I was pumping out graduated steel rolls for pipe bending in a matter of a week or two. I had quite a bit of programming experience though, so that helped.

Good luck on your 2nd installment!

thanks, thats cool you picked up the lathe easy, I had some problems learning how to program lathe blueprints into MasterCAM but this semester I plan to learn that

Plankton · 02-05-2020, 11:44 AM

The software and tech has had a few years to refine since I've had my grubby hands on it. I can't remember anything about it other than the guy that was showing me the ropes had a hot wife.

02-05-2020, 09:59 AM	#6 (permalink)
Plankton Just Keep Swimming... Join Date: Apr 2012 Location: See signature... Posts: 7,765	GD&T it up. __________________ See location...

02-05-2020, 11:12 AM	#8 (permalink)
Plankton Just Keep Swimming... Join Date: Apr 2012 Location: See signature... Posts: 7,765	I was trial by fire when I got thrown into running a turret lathe while in between jobs. They showed me a simple part and how to make it, then left me alone with little guidance. I was pumping out graduated steel rolls for pipe bending in a matter of a week or two. I had quite a bit of programming experience though, so that helped. Good luck on your 2nd installment! __________________ See location...

02-05-2020, 11:44 AM	#10 (permalink)
Plankton Just Keep Swimming... Join Date: Apr 2012 Location: See signature... Posts: 7,765	The software and tech has had a few years to refine since I've had my grubby hands on it. I can't remember anything about it other than the guy that was showing me the ropes had a hot wife. __________________ See location...

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

01-24-2020, 09:41 AM	#1 (permalink)
Mindy ask me about cosmology Join Date: Oct 2016 Location: Milky Way Galaxy Posts: 9,077	https://www.youtube.com/watch?v=fD4OMlP7j1U Learned how to make arcs and circles (G02, G03)(its needed for the air motor I am in the process of starting and plan to build. Gotta cut 5 parts and place on top of last courses base plate Wednesday I left early without finishing what i started but im going to take extra time going further. professor allows us to come in at 4p, 2 hours early. still completely understanding it, one way I have learned to understand things is by explaining as much as i can about the subject to my pops. he is the best listener i have ever met.

01-28-2020, 08:14 PM	#4 (permalink)
Raime Forever Electro Join Date: Sep 2019 Posts: 511	https://www.reuters.com/article/us-w...19603620080423 I didn't know wizards cared about making penises disappear. ****'s tight tho.

02-05-2020, 09:41 AM	#5 (permalink)
Mindy ask me about cosmology Join Date: Oct 2016 Location: Milky Way Galaxy Posts: 9,077	I have a part similar to this where I have to drill 6 holes, this guy explains a way to do that. looking at my blueprints for all the parts, its going to be the most detailed project i've ever built. its an air motor, ive seen a finish version and its cool asf. but all the parts need to be machined to fit tight and .005 off on a part, they wont fit like legos