Last Bought

Key · 08-22-2018, 08:43 PM

Quote:

Originally Posted by Frownland

It's not a loser vape it's for smoking marijuajuana.

You've redeemed yourself. Only slightly.

~~MicShazam~~ · 08-26-2018, 02:51 PM

Because I've got so much class and no shame, I got this classic/famous poster online today:

somewhat NSFW

Mindy · 08-26-2018, 02:56 PM

**Frownland** · 08-31-2018, 02:36 PM

Quote:

Originally Posted by Frownland

Yocan Evolve D Plus Dry Herb Vape Pen Kit

Got this to be discreet at a fest this weekend. Works well, combustion style, and only 15 bucks.

It's really harsh. I used it all last weekend and I've still got phlegm. Next time I'm going to get an actual dry herb vape instead of this discreet pipe.

Aux-In · 08-31-2018, 05:19 PM

I had an old set of ear clips where the speakers were falling off their housings, so I tried super gluing them back together. Thought I had that solved, but the music on my phone kept cutting out. At first I figured it was my phone until I realized the wires were probably shorting or whatever, and this was causing the music to stop -- constantly. That's not acceptable, so time for a new pair, right?

For whatever reason, the powers that be have decided that there needs to be a generation gap in headphone technology in all department stores in which they're sold, at least around here. Sea after sea of uncomfortable ear buds, some '80s style headphones with the metal extendable band and plastic pieces, or the higher-end headgear with the large muffs. I don't get it, there should be at least one peg of them. Had to order those online, and even then it was slim pickings.

Mindy · 08-31-2018, 05:27 PM

Quote:

Originally Posted by Aux-In

I had an old set of ear clips where the speakers were falling off their housings, so I tried super gluing them back together. Thought I had that solved, but the music on my phone kept cutting out. At first I figured it was my phone until I realized the wires were probably shorting or whatever, and this was causing the music to stop -- constantly. That's not acceptable, so time for a new pair, right?

For whatever reason, the powers that be have decided that there needs to be a generation gap in headphone technology in all department stores in which they're sold, at least around here. Sea after sea of uncomfortable ear buds, some '80s style headphones with the metal extendable band and plastic pieces, or the higher-end headgear with the large muffs. I don't get it, there should be at least one peg of them. Had to order those online, and even then it was slim pickings.

congrats on the new pair

Aux-In · 08-31-2018, 05:28 PM

Quote:

Originally Posted by Mindfulness

congrats on the new pair

I'm definitely celebrating

.

innerspaceboy · 08-31-2018, 06:19 PM

Ordered a rare oversize promotional print for the premiere of my favorite record in the UK. Tracking number took it as far as US Customs and then it disappeared eleven days*ago.*

This happens all the time with international orders. There's a chance it will just magically appear at my doorstep two or three weeks from now. Fingers crossed.

I'd ordered two promo prints to frame on opposite sides of a picture window in my dining room. The first print arrived intact so I really hope the other one makes it to me eventually.

Key · 08-31-2018, 09:09 PM

Quote:

Originally Posted by innerspaceboy

Ordered a rare oversize promotional print for the premiere of my favorite record in the UK. Tracking number took it as far as US Customs and then it disappeared eleven days*ago.*

This happens all the time with international orders. There's a chance it will just magically appear at my doorstep two or three weeks from now. Fingers crossed.

I'd ordered two promo prints to frame on opposite sides of a picture window in my dining room. The first print arrived intact so I really hope the other one makes it to me eventually.

If it was shipped through USPS, sometimes they only have tracking in the US. Often, it's up to the other countries to decide whether or not it's tracked all the way. Depends on their post office if anything.

We have a USPS priority mail service at UPS and we have to tell customers that there's a chance you can't track it outside of the US. Hope that clears it up.

Freebase Dali · 08-31-2018, 10:47 PM

Makita 7 1/4" hypoid saw along with a straight edge clamp system, basically because I'm too cheap to buy a table saw to rip the small stuff I'm doing.

It's HEAVY AS F*CK. Worth it though.

My first little dumb project with it was cutting some 1/4" ply to fit inside a shelving unit I have under my mounted TV in the living room.. the idea was to hide cables and stuff because the shelves don't have a back. I painted the shelf backing I made the same as I painted the walls and it's like f*cking magic... when you look at it, you think you're looking at a wall, but it's actually not. The cables and everything are behind. It's actually kind of trippy to be honest.

Didn't even have to bust holes in the wall.

08-26-2018, 02:56 PM	#2263 (permalink)
Mindy ask me about cosmology Join Date: Oct 2016 Location: Milky Way Galaxy Posts: 9,045	__________________ https://www.instagram.com/shhons_meme_agency

08-31-2018, 05:19 PM	#2265 (permalink)
Aux-In Wrinkled Magazine Join Date: Jan 2015 Location: In Time Posts: 467	I had an old set of ear clips where the speakers were falling off their housings, so I tried super gluing them back together. Thought I had that solved, but the music on my phone kept cutting out. At first I figured it was my phone until I realized the wires were probably shorting or whatever, and this was causing the music to stop -- constantly. That's not acceptable, so time for a new pair, right? For whatever reason, the powers that be have decided that there needs to be a generation gap in headphone technology in all department stores in which they're sold, at least around here. Sea after sea of uncomfortable ear buds, some '80s style headphones with the metal extendable band and plastic pieces, or the higher-end headgear with the large muffs. I don't get it, there should be at least one peg of them. Had to order those online, and even then it was slim pickings. __________________ Reviews l YouTube Playlist: Another Dimension "All over a bowl of bitter beans."

08-31-2018, 10:47 PM	#2270 (permalink)
Freebase Dali Partying on the inside Join Date: Mar 2009 Posts: 5,584	Makita 7 1/4" hypoid saw along with a straight edge clamp system, basically because I'm too cheap to buy a table saw to rip the small stuff I'm doing. It's HEAVY AS FCK. Worth it though. My first little dumb project with it was cutting some 1/4" ply to fit inside a shelving unit I have under my mounted TV in the living room.. the idea was to hide cables and stuff because the shelves don't have a back. I painted the shelf backing I made the same as I painted the walls and it's like fcking magic... when you look at it, you think you're looking at a wall, but it's actually not. The cables and everything are behind. It's actually kind of trippy to be honest. Didn't even have to bust holes in the wall. __________________

08-26-2018, 02:51 PM	#2262 (permalink)
~~MicShazam~~ Account Disabled Join Date: Aug 2015 Location: Aalborg Posts: 7,634	Because I've got so much class and no shame, I got this classic/famous poster online today: somewhat NSFW