Music Banter - View Single Post

Oldmate69 · 07-22-2023, 05:58 PM

Hey guys first thanks for considering helping…
I have a friend who plays outdoor venues with two mics connected to an rca white and red plug and thin wire combined into an echo pedal and out to his Bose L1 8 two input speaker. I know this is silly so I thought I would help him. He’s not tech savvy and I’m barely knowledgeable so pls be kind as I dunno much and need it explained simply lol if that’s ok…
I wanted to buy him a small mixer like Behringer xenyx 802 but not sure if I would set it up correctly. I have a photo I’ll try post in the comments but here goes…
It has two XLR mic inputs…easy enough
I thought if I used his echo pedal with one out 6mm Jack lead that goes into the FX send (which I believe is an input) I could add echo to the mics when he uses the red fx buttons under the mic inputs to switch mic echo or fx on. Then the L and R main output I thought I could use a 6mm lead to connect to each inputs on his speaker…eg L to input one and R to input 2. Does this make sense and will it work? He also has a guitar but that’s a sep input so no dramas there I get that bit. Let me know thx
I dunno how to post photo

07-22-2023, 05:58 PM	#1 (permalink)
Oldmate69 Groupie Join Date: Jul 2023 Posts: 1	Noob needs help with mixer Hey guys first thanks for considering helping… I have a friend who plays outdoor venues with two mics connected to an rca white and red plug and thin wire combined into an echo pedal and out to his Bose L1 8 two input speaker. I know this is silly so I thought I would help him. He’s not tech savvy and I’m barely knowledgeable so pls be kind as I dunno much and need it explained simply lol if that’s ok… I wanted to buy him a small mixer like Behringer xenyx 802 but not sure if I would set it up correctly. I have a photo I’ll try post in the comments but here goes… It has two XLR mic inputs…easy enough I thought if I used his echo pedal with one out 6mm Jack lead that goes into the FX send (which I believe is an input) I could add echo to the mics when he uses the red fx buttons under the mic inputs to switch mic echo or fx on. Then the L and R main output I thought I could use a 6mm lead to connect to each inputs on his speaker…eg L to input one and R to input 2. Does this make sense and will it work? He also has a guitar but that’s a sep input so no dramas there I get that bit. Let me know thx I dunno how to post photo Last edited by Oldmate69; 07-22-2023 at 06:04 PM.